Lotta Van Leeuwen, Tianchen Yu, Caroline Caglioni
Abstract:
Abstract unavailable for this team for this semester.
Please note, the final report is not available for this team for this semester and the Final Presentation is linked instead.
Foam Filtration - Spring 2015
Marlana Hinkley, Alena Hutchinson, Ethan Keller, Alicia Peters
Abstract:
The primary goal of foam filtration is to design a low cost, locally sourced, easy to operate water filtration system. Throughout the semester, backwash cleaning efficiency experiments were performed on the small-scale filter, designed in Fall 2014 to hydraulically model the full scale filter implemented in El Carpintero. The objective of these experiments was to determine an empirical relationship between backwash pore velocity and the percent mass removal of the particles from the foam during the cleaning cycle. Experimentation with different pore sizes revealed a new mechanism for filtration: the foam acts as a sedimentation tank, providing a large surface area for the flocs to settle. This is contrary to the initial hypothesis that coagulant-covered flocs stuck to the inside of the pore walls, and that a large shear force would be required to remove the flocs during backwash. Evidently, there is still much to be understood with regards to the mechanisms behind filtration and backwash.
Apart from work in the laboratory, the team continues to analyze data collected from experiments performed on the full-scale filter in El Carpintero by AguaClara engineer, Walker Grimshaw, to understand the discrepancies between performance in the laboratory and in the field.
Much of the semester was spent preparing for the EPA P3 Conference held on April 10th and 11th in Washington, DC. The team fabricated a small scale model of the technology, prepared a technical report, and created a poster display for the competition, and received an Honorable Mention for its efforts in creating an “Off-Grid Solution to Drinking Water Treatment.”
StaRS Filter Theory - Spring 2015
Theresa Chu, Nick Coyle, Alexandra Schwab
Abstract:
The Stacked Rapid Sand Filter Theory team designed and built an apparatus to induce clogging and test the head loss across a slotted pipe, which allows the water to flow directly into the filter without sand leaving the filter. Experiments were run with high turbidity and coagulant doses to clog the slotted pipe and determine which influent conditions led to clogging and high head loss. Slotted pipes as an injection system for the stacked rapid sand filters have proven to be problematic due to clogging. Results show that floc build up of coagulant clay increased head loss and clogged the slots.
